How it all began ...
Help Build The Rogue
If you find any information useful on this site, please consider a small donation to cover hosting costs, as well as materials costs for the car.
Those who have donated ...
Help Build The Rogue
Those who have donated ...
Categories
Quicksearch
Blog Administration
Thursday, December 15. 2005
CNC Retrofit
Tonight I did most of the assembly for the stepper motor controller.
I'm quite impressed with this kit from CNC Hobby. The instructions were clear and concise and well laid out (with a few good helpful hints thrown in).
All I have to do now is add the sla7062m stepper motor controller chips after testing the circuitboard according to the directions, locate an appropriate case and 24V transformer and I'm ready for the next step (pardon the pun).
I'm quite impressed with this kit from CNC Hobby. The instructions were clear and concise and well laid out (with a few good helpful hints thrown in).
All I have to do now is add the sla7062m stepper motor controller chips after testing the circuitboard according to the directions, locate an appropriate case and 24V transformer and I'm ready for the next step (pardon the pun).
Comments
Display comments as
(Linear | Threaded)
No comments
The author does not allow comments to this entry
Calendar
|
August '18 | |||||
| Mon | Tue | Wed | Thu | Fri | Sat | Sun |
| 1 | 2 | 3 | 4 | 5 | ||
| 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| 13 | 14 | 15 | 16 | 17 | 18 | 19 |
| 20 | 21 | 22 | 23 | 24 | 25 | 26 |
| 27 | 28 | 29 | 30 | 31 | ||
